Sage Barista Pro (SES878)
Next-generation all-in-one machine equipped with 3-second ThermoJet heating, intuitive LCD animation, and 30 precision grind steps.
Find Compatible Accessories
See portafilters, tampers, baskets and more that fit this machine.
About the Sage Barista Pro (SES878)
UK and European counterpart to the Breville Barista Pro (BES878), pairing ThermoJet heating and an LCD interface with the 54mm 3-ear group head architecture.
Mechanically verified with a 54mm group head (3 symmetrical locking ears, 6.2mm tab thickness, 120° symmetrical (3-tab)), ThermoJet with integrated PID, and a recommended tamper base of 53.3mm – 53.4mm.
| Portafilter Size | 54mm |
| Pump Pressure | 15 bar |
| Water Tank | 2.0 L |
| Dimensions (W × D × H) | 354 × 410 × 406 mm |
| Weight | 9.08 kg |
| Milk Steaming | 1-hole manual steam wand (factory spec) |
- Instant 3-second ThermoJet heat-up system
- Digital LCD display with intuitive grinding and shot feedback
- 30 stepped grind size settings for dialing in
- Fast transition between brewing and steaming
- Single heater cannot brew and steam simultaneously
- EU/UK 230V plug configuration (SES878)
Compatibility at a Glance
- IMS Filtra Precision Competition Deep Filter Basket (18–22g): Use with a 54mm bottomless portafilter or remove the internal plastic spout divider.
- Normcore Magnetic Dosing Funnel V2 (Outer Rim Sit): Does NOT fit into the integrated hands-free grinder cradle fork on the Sage Barista Pro (SES878) while attached; hold the portafilter below the chute or grind into a dosing cup.
Recommended Accessories
Verified compatible and conditional accessories tested for the Sage Barista Pro (SES878).
54mm Bottomless Portafilter (3-Ear Breville/Sage Profile)
54mm • 3-Ear Symmetrical (6.2mm Tabs)
Spring-Loaded Calibrated Tamper V4
53.3mm Flat Stainless Base (Fits Nominal 54mm Breville/Sage Baskets)
Precision Competition Filter Basket (14–18g)
B62.52TH24E • 54mm Group • H24mm
Ultra-Slim Sintered Contact Puck Screen
53.3mm Diameter • 1.7mm Thickness • 150µm Mesh
Flick Retractable WDT Espresso Distribution Tool
6x Rounded Stainless Needles (0.5mm Installed + 0.35mm Set Included)
Cafiza Espresso Machine Cleaning Powder
566g (20oz) Jar • NSF Certified Group & Basket Detergent
Full dimensional specifications Verified
- Nominal Group Head Diameter
- 54mm
- Recommended Tamper Base
- 53.3mm – 53.4mm
- Stock Basket Inner Diameter
- 53.4mm
- Locking Ears
- 3 symmetrical locking ears (6.2mm)
- Ear Angular Orientation
- 120° symmetrical (3-tab)
- Max Spouted Basket Depth
- 25mm (with plastic insert) / 28mm (insert removed)
- Max Bottomless Basket Depth
- 30mm
- 3-Way Solenoid Valve
- Yes — 3-way solenoid valve
- Heating System
- ThermoJet with integrated PID
- Dispersion Screen Clearance
- Shares identical 54mm group ring geometry with Breville BES870 / BES878
Frequently Asked Questions
What size tamper fits the Sage Barista Pro (SES878)?
The Sage Barista Pro uses a nominal 54mm group head with an internal basket tamper zone of 53.4mm. We recommend a 53.3mm – 53.4mm calibrated tamper base for an edge-to-edge seal that prevents perimeter channeling.
What portafilter locking ear geometry does the Barista Pro use?
The Barista Pro requires 3 symmetrical locking ears with a 6.2mm tab thickness and 120° symmetrical (3-tab) orientation. Always match ear count, angle, and tab thickness—nominal 54mm diameter alone does not guarantee fit.
Can I backflush the Sage Barista Pro with a blind basket and Cafiza?
Yes. The Sage Barista Pro (SES878) includes a 3-way solenoid valve (Yes — 3-way solenoid valve) and safely supports detergent backflushing using a blind basket or rubber cleaning disc.
What is the maximum filter basket height for the Barista Pro?
For the stock spouted portafilter, the maximum basket depth is 25mm (with plastic insert) / 28mm (insert removed). With a compatible bottomless portafilter, it accommodates deep competition baskets up to 30mm.
Does a 1.7mm puck screen fit the Sage Barista Pro?
Shares identical 54mm group ring geometry with Breville BES870 / BES878. Always verify at least 2mm of headspace above the tamped coffee bed before locking in the portafilter.