Water care tool
Water Hardness Converter
Convert ppm, German and French degrees, and grains per gallon, then check what the reading means for your espresso machine.
Your water values
Type in any unit or try a sample below.
mg/L as CaCO3
Quick test samples
Machine water check
Waiting for reading< 30 Balanced
50–85 Monitor
91–140 Hard
> 140 ppm
No reading entered yet
Enter a reading in any unit on the left, or click a quick test sample to convert all 4 scales and check limescale risk.
Water care ranges (ppm as CaCO3)
Reference: SCA Water Quality HandbookVery soft
< 30 ppm (< 1.7 °dH)
Soft / Below SCA
30–49 ppm (1.7–2.7 °dH)
SCA Optimal
50–85 ppm (2.8–4.8 °dH)
Upper borderline
86–90 ppm (4.8–5.0 °dH)
Monitor / Filter
91–140 ppm (5.1–7.8 °dH)
High scale risk
> 140 ppm (> 7.8 °dH)
Quick recommendations
- Use a measured reading from a water test strip or meter.
- Follow the espresso machine maker’s water guidance.
- Recheck after filtering or remineralizing your water.
Espresso water hardness FAQs
What is the ideal water hardness (ppm and °dH) for espresso machines?
The Specialty Coffee Association (SCA) recommends total hardness between 50 and 85 ppm as CaCO3 (approximately 2.8 to 4.8 °dH or 2.9 to 5.0 GPG). This window provides enough calcium and magnesium for balanced flavor extraction while preventing boiler and thermocoil scale.
How do I convert German degrees (°dH) to ppm?
Multiply German degrees (°dH) by 17.848 to get ppm (mg/L as CaCO3). For example, 4 °dH equals roughly 71 ppm, which sits cleanly inside the safe espresso window.
Can I use distilled or pure reverse osmosis (RO) water in my espresso machine?
No. Pure distilled or un-remineralized RO water (< 30 ppm) lacks the mineral ions needed to extract coffee flavors, causes flat or sour shots, can trigger false low-water boiler probe readings, and gradually leaches metal from copper or brass boilers.
How often should I descale if my tap water is above 90 ppm?
With moderate hardness between 91 and 140 ppm (5.1–7.8 °dH), install an in-tank ion-exchange resin filter pouch (such as BWT Bestsave) and descale every 3 to 6 months. Above 140 ppm (>7.8 °dH), avoid untreated tap water altogether—use filtered soft water or remineralized RO water to protect 3-way solenoid valves and group restrictors.
Keep dialing in